800-227-7515

Little Beaver Logo
A Formula for Increased Fencing Profit

A Formula for Increased Fencing Profit

May 22, 2025

Mechanical Earth Drill for Fencing

There’s a lot of math involved in running a fencing company. Calculating the time required to complete a job, the number of crew members that will be needed on site, how many jobs the operation can take on and the cost of materials is just the beginning to ensure the business will be profitable. Every opportunity to reduce the time spent on the installation process and maximize resources on the jobsite has a direct impact on the bottom line.

A significant line item in any fencing operation’s calculation is its equipment cost. Most residential fence installers invest in an earth drill to speed up the posthole digging process.

This key piece of equipment has a big impact on a fencing crew’s productivity, and, with the right features, this expense can lead to a big boost in the bottom line.

 

Hydraulic earth drill fencing

One is Less Than Two

There are many portable earth drill options on the market, but most require two-man operation for safety. When an earth drill hits an obstacle underground, it can jerk and jar the operator with enough force to result in injury. Because this is so dangerous, most drills require two operators to hold the drill steady and combat these effects. However, Little Beaver’s torque tube makes one-man drilling possible with both our Mechanical and Hydraulic Earth Drills by redirecting kickback to the engine carriage as opposed to the handles.

When you can subtract one operator from the drilling process, the labor cost for that step is cut in half. Multiply that by dozens of postholes for a single fencing job and the savings add up. The second crew member can be reassigned elsewhere, such as following behind and placing the fence posts, to optimize the workforce on the jobsite.

 

Double Drilling SpeedLittle Beaver fencing- decrease labor. Increase Profits.

Ready for more math? One of the key advantages of our Mechanical Earth Drill is its operational speed — the auger can rotate at up to 360 RPM. Most other drills can’t meet this speed in a one-man drilling package and it’s common to see competitive drills operating at half that pace.

The Mechanical Earth Drill can create a posthole in less than one minute, cutting down on drilling time and speeding up the installation process. The fast rotation speed also creates a smoother, cleaner hole than other posthole digging options, reducing time required to prepare the hole for the fence post. By cutting back on time spent digging, contractors can complete more projects in less time, bringing additional income into the equation.

 

Do The Math

The common denominator leading to one-man drilling and increased drilling speed is Little Beaver’s Mechanical Earth Drill. With reduced labor requirements and improved safety features, our earth drills provide both short- and long-term financial benefits.

Calculate your potential savings! Learn more about how Little Beaver earth drills can increase fencing revenue with faster drilling today.

Choosing the Right Earth Drilling Equipment for Your Project

Choosing the Right Earth Drilling Equipment for Your Project

Nov 15, 2024

Whether you’re a DIY’er looking to complete one simple backyard project or a contractor tackling customer jobs, choosing the correct drill type and auger for a project significantly increases the ease and efficiency of your drilling job. Let’s explore which choices are the best for your project.

Mechanical or Hydraulic?

Horizontal Boring Tips and Best PracticesDepending on the project, you might find that a mechanical earth drill performs better than a hydraulic earth drill. However, the best option comes down to a few different factors including borehole diameter, soil type and maneuverability needs.

Our Mechanical Earth Drills are ideal for drilling relatively small holes, ranging from 1.5 to 12-inch diameters, in sandy or loamy soil profiles. You might use this drill for landscaping, erecting signs or installing fence posts. DIY’ers often find the Mechanical Earth Drill to be the superior option for home improvement projects. With additional kits, these drills extend past simple post hole drilling. Little Beaver Mechanical Earth Drills offer the option to pair with a horizontal boring kit to bore up to 50 feet under driveways, sidewalks and parking lots.

Fencing with Hydraulic Earth DrillOur Hydraulic Earth Drills have twice the torque of our mechanical models, which makes them better for tasks demanding larger holes up to 16 inches. This could include projects like building a pole barn or monitoring groundwater. These high-powered machines are optimal for use in frozen soil, clay and rocky sediments.

Both earth drill options feature compact, lightweight designs that give them a small footprint and allow them to reach areas where larger models and skid steers can’t go.

Hydraulic Earth Drills can take mobility one step further. Our Towable Earth Drill conveniently attaches to a trailer hitch for hauling to and from the jobsite while the UN-Towable can fit in the back of most SUVs and pickup trucks. They’re also able to drill right next to buildings and other structures. For the toughest jobs, we offer the Big Beaver. Rental centers often choose to stock both mechanical and hydraulic earth drills to appeal to a wider audience of users, including DIY’ers and contractors.

Selecting an Auger

Little Beaver PointsAuger selection can be just as important as drill selection. Roughly 80% of projects will use a standard auger with standard points and blades, which work best in loamy, sandy soil profiles. Typically, these augers range in size between 1.5 to 16 inches, reaching depths of up to 36 inches. Some manufacturers offer additional points and blades that help to expand the use of the standard auger. For example, a carbide blade is best for the toughest types of ground, such as asphalt, dense clay and frozen dirt.

When there’s harsh, rocky terrain underfoot, you need an equally rugged auger. Heavy-duty augers are designed with features like larger flighting and tougher cutting blades. Little Beaver also has heavy-duty points and blades to slice through harder ground, like gravel.

To choose the best auger for your project, it’s important to understand the terrain you will be drilling in. It’s also important to recognize if you’re going to be using the same drill for more than one project. While a post hole might be drilled in an area with loamy soil, a sign might be installed in harsher soil conditions, which will require different auger types and, possibly, different auger diameters.

Making the Best of Your Project

Little Beaver offers an expansive library of informational resources to help you make your project a success. In the FAQ section of our website, you can find detailed answers to questions that may arise as you drill deeper into a project. We’re also happy to have you contact us directly by email or phone.

The Hydraulic Hype

The Hydraulic Hype

Dec 19, 2022

Learn how hydraulic drills work and the safest ways to use them

Powerful and reliable, hydraulic earth drills offer a variety of benefits for drilling projects that require breaking through heavy clay or rocky soils. With the additional torque that comes with the hydraulic drill, it’s important to understand the hydraulic power source and how to use a hydraulic earth drill safely.

Why choose hydraulic earth drills?

Earth auger flighted extensionsPerhaps the most obvious question is why choose hydraulic earth drills in the first place? With a durable body and higher torque than mechanical options, a hydraulic drill can bring more power to a drilling project. Hydraulic earth drills can also drive larger diameter augers with extensions available for deeper drilling projects. Equipment longevity is a factor too. Hydraulic earth drills usually require fewer repairs overall, which lowers costs in the long run.

Once you’ve decided the hydraulic drill is right for your project, it’s time to learn more about what a hydraulic drill is and what you need to be aware of to use one safely. Hydraulic pressure is what generates the force behind a hydraulic drill. So, we’ll start there.

What is hydraulic pressure?

The term ‘hydraulic pressure’ refers to the pressure exerted by fluid (whether at rest or moving) on a surface or structure. In the case of hydraulic earth drills, the hydraulic pressure is the force the fluid creates to drive the drill’s auger forward.

Built-in pressure relief valveThe hydraulic system in Little Beaver hydraulic earth drills generates pressure ranging from 2,500 to 2,700 pounds per square inch with operating speeds up to 150 rpm. Little Beaver hydraulic drills have a hydraulic pressure relief valve that reduces the risk of hydraulic power exceeding the maximum pressure the drill is built to withstand. Once the hydraulic pressure reaches a pre-determined point, the pressure relief valve responds and feeds the excess flow from the system back into the tank. To ensure safety, the valve should be set as equal to or less than the rated working pressure of the weakest component in the hydraulic system.

A relief valve doesn’t remove system pressure, it instead works to prevent pressure from rising past the pre-determined level. The valve reacts quickly to protect against damaged equipment, disrupted work and even injury that can come from hydraulic pressure being too high.

How can you increase safety with the hydraulic earth drills?

Little Beaver hydraulic earth drills improve operator safety thanks to the torque tube, which eliminates kickback and allows for safe and productive one-man drilling without sacrificing power. An optional two-man handle is available too. This handle is more convenient when drilling boreholes between 10-16 inches in diameter where two people are needed to steady the auger. The bigger, heavier auger requires two people to handle it and lift it out of the ground.

As with any project, you should follow basic safety precautions with your hydraulic earth drill. Make sure there are no bystanders in the area before you start. Never run the engine inside a building or enclosed space as exhaust gases contain carbon monoxide and can be deadly. Observing your surroundings before you start drilling keeps both you and any bystanders safe throughout the drilling process.

Always contact local utility companies before drilling to determine the exact location of underground services. Inadvertent severing of telephone, fiber optic or community antenna television transmission cables or damaging sewer pipe is costly. Additionally, rupturing gas or water lines can cause serious injury. To locate these lines, call your local utility companies 48 hours in advance of digging to mark the positions.

Know Your Drill

If you’re looking to complete a drilling project for industrial fencing, landscaping, mobile home and light utility anchoring or any other drilling project that needs high power while still requiring maneuverability, a hydraulic earth drill might be right for you. To learn more about how hydraulic earth drills can help in your outdoor projects, consult with the Little Beaver team!

Contact our team today.

Are You Ready for Utility Anchoring?

Are You Ready for Utility Anchoring?

Nov 21, 2022

Utility Anchoring Adaptors Make Expanding Your Business Easy

Are you looking to dip your toes in the utility anchoring market? Maybe you’d like to start anchoring light poles or even commercial grade telephone poles? A utility anchoring adaptor expands the capabilities of our hydraulic earth drill so you can do more with your existing equipment. Little Beaver hydraulic earth drills paired with our utility anchoring system can anchor utilities faster and safer than traditional methods.

Traditional Utility Anchoring Options

Traditional utility anchoring methods rely on two different options: a high-speed, hand-held drill commonly known as an “anchor cranker” and installing the anchors by hand.

Hand anchoring requires a straight rod to screw the anchor into the ground using only the strength of crew members. Installation with this method averages one anchor per hour, a slow, physically demanding process that takes longer than other anchoring alternatives.

Anchor crankers, the other alternative, feature two large handles with a gas-powered, high-speed rotary unit and can only be operated safely with two people. This system is cumbersome and dangerous. Due to the machine’s torque and high rpm, if one operator happens to lose their grip, the other is typically unable to maintain control. In the event that both operators let go, the machine’s torque instantly transfers from driving the anchor into the ground to aggressively spinning the handles above the ground. Too often, the free-spinning metal will strike an operator, resulting in leg or other lower-body injuries.

Utility Anchoring Adaptors

Utility Anchoring DrillAt Little Beaver, we offer utility anchoring adaptors for our hydraulic earth drills. The adaptor connects the drill to the utility anchor for installation. We also offer a high-torque anchor handle for the hydraulic drill that generates 360 foot-pounds of torque at 60 RPM.

This setup brings the benefits of our torque tube to anchoring, eliminating dangerous kickback. It also expands crew members’ abilities to work faster. A single operator can install a utility anchor with a hydraulic earth drill in less than two minutes allowing for the completion of an entire pole in under an hour.

If the anchor hits something hard and becomes stuck, manually dislodging an anchor can take as long as 45 minutes, depending on the depth. Hydraulic drills, on the other hand, are equipped with reverse. If an anchor gets stuck, it can be backed out in seconds.

Our hydraulic earth drill paired with the anchoring system is perfect for limited access applications where larger equipment isn’t easily maneuvered. This is a good option for utility lines that are in residential areas or tucked behind buildings.

Beyond the safety feature of the torque tube, there are other health benefits to using our utility anchoring system. It reduces strain on the operator’s arms and hands by minimizing vibration. In turn, this reduces the potential for worker’s compensation claims and project delays due to injury or work time limits. It’s also a quieter alternative to gas-powered anchor cranker counterparts, helping to protect hearing.

Little Beaver utility anchoring adaptors allow you to take on utility anchoring projects quickly and safely. Contact us to learn about this and other attachments for your earth drill.

How to Install Wooden Fence Posts

How to Install Wooden Fence Posts

Jul 31, 2022

Using an Earth Drill to Successfully Install Wooden Fence Posts

Installing wooden fence posts can be a great DIY project, especially if you’re renting an earth drill to make the job more efficient and less labor-intensive. Before you get started with your fencing project, there are a few things to know to set yourself up for success and prevent frustration in the future.

Plan Ahead

As tempting as it might be to start drilling as soon as possible, it’s important to call 811 and check local codes and ordinances before you drill. 811 is the national call-before-you-dig phone number that will send out a locator who will mark the approximate location of any buried utilities with paint or flags so you can avoid them. Some areas will also require permits before you build your fence, so make sure not to skip this step.

Mechanical earth auger for fencepost installation

What You’ll Need:

  • Shovel
  • Gravel
  • Level
  • Concrete mix
  • Mechanical earth drill with an auger 3 times wider than the posts
  • Stakes (enough for each wood post)
  • Wood posts (at least 8 feet in length)
  • Rope (the length you’re setting your fence posts apart)

Lay the Foundation

The type of wood you choose for your fence posts will determine their life expectancy. It’s also important to look for chromated copper arsenate (CCA) pressure-treated wood, which will slow the decay of wooden fence posts over time. Pine is a popular choice for fences that can last up to 30 years when treated. Other long-lasting woods are redwood, sweetgum or cedar because they are highly resistant to moisture which helps prevent decay, cracking or warping.

Once you have the supplies you’ll need, carefully mark the location of each post with a temporary stake. When building wooden fences, it’s crucial to have the fence posts in a straight line, otherwise you’ll notice the poles weaving in and out of line after the poles have been placed. Stretch a long rope between each stake for a simple way to measure and mark the location of each post.

After you have marked the location of each post, it’s best to use a shovel to remove any sod you might be drilling through. Grass and vegetation can clog the end of an auger — especially when wet. This step might seem like a hassle at first, but it will save you time and frustration once you start drilling.

When it comes to picking a drill to rent, we suggest prioritizing safety.  All Little Beaver earth drills incorporate torque tubes along with a slip clutch for added safety while drilling. A torque tube offers consistent safety by absorbing shock as you encounter different soil and resistance. On the other hand, the slip clutch offers protection for both the operator and the drill if you hit a rock or tree root while drilling.

Towable hydraulic earth auger

Get Drilling

When the prep work has been finished, it’s time to get drilling. Make sure the auger enters the soil perpendicular to the precise point you marked with the stake and keep it vertical as you drill. It’s important to prevent the auger from entering the ground at an angle; otherwise, you risk setting a crooked fence post or a creating hole that’s difficult to backfill.

Dig the fence post hole so the diameter is 3 times the width of the post. For example, if the fence post has a 3-inch diameter, the hole should be about 9 inches wide. The depth of the hole should be one-third to one-half the post height above ground. For example, if the fence post is 9 feet tall, the hole depth should be at least 3 feet. If you live in a cold climate, it’s also important to make sure you dig your post below the frost line to prevent the fence posts from moving or heaving when the ground freezes in the winter. To dig below the frost line, check the local frost lines in your area and dig your hole 6-inches below that.

When the hole is complete, make sure to stop the auger and pull it out for a clean hole. To make this step easier than ever, Little Beaver mechanical earth drills have a lightweight design and our hydraulic earth drills feature a reverse button. Continue the drilling process until all fence post holes are complete.

Set the Posts

When all the holes are drilled, pour in about 3 to 4 inches of gravel. This will help with drainage as opposed to a post hole that’s filled entirely with concrete. Use a piece of scrap lumber or other blunt object to tamp down the gravel. This will ensure it doesn’t settle and allows for optimal drainage. On top of the gravel, add about 6 to 8 inches of concrete, and place your post in the middle of the mixture. Using a level right after this step will help to make sure the post is properly positioned. Once the concrete is leveled, fill the rest of the hole by backfilling the dirt and tamping as you go. From here, follow the instructions on your concrete mix to see how long it will take to dry.

After this step, your fence posts are ready to go, and the rest of your fence can be assembled. If you have any questions regarding drilling holes for fence posts with a Little Beaver earth drill, don’t hesitate to contact the Little Beaver team. We’re happy to help with any questions that might come up.