 |
 |
 |
 |
 |
 |
 |
|
 |
 |
Little Beaver makes two types of horizontal boring kits
that turn your Little Beaver earth drill into a powerful and
cost effective horizontal boring machine. |
Sidewalk Auger Kit
|
 |
1. 3" x 5' sidewalk auger
2. 2"x 5' wiggle joint extension
3. Horizontal drill key
|
The Sidewalk Auger Kit uses a 3" diameter auger and wiggle joint extension to quickly bore under sidewalks up to 5' long. Since the torque tube is not used with this kit, a horizontal drill key is included to bypass the engine kill switch.
|
|
|
Water Drilling Kit
|
 |
4. Water drill bit (2", 3" or 4")
5. Water swivel assembly
6. Water swivel adaptor
7. Horizontal drill key
|
Drill Bit Sizes: 2" 3" 4" |
|
The Water Drilling Kit is used for horizontal boring under driveways or parking lots up to a distance of 50'. The water drilling kit consists of a water drill bit, swivel adaptor, swivel assembly, and a horizontal drill key. To complete the kit, you will need a garden hose, 3/4" Schedule 80 water pipe, and 3/4" pipe collars. Once the kit has been assembled and starter trenches have been dug, boring can begin.Water from your garden hose or pump runs through the water swivel, water pipe and out the end of the drill bit, flushing the cuttings from the bore hole.
|
|
|
Drill Chuck Attachment
|
|
Convert any Little Beaver earth drill into a powerful wood or concrete drill with an efficient drill chuck attachment. The 3/4" capacity chuck accommodates standard wood or masonry bits up to 1.5" in diameter and drills clean holes in fence posts, wooden decking, concrete and masonry.
|
|
|
 |
To minimize your equipment investment, Little Beaver offers low cost adaptors that allow the continued
use of other brands of earth drills or augers. As these other brands reach the end of their useful life,
you can then cost effectively replace them with Little Beaver.
|
Little Beaver Earth Drills / Other Brand Augers
|
 |
Do you have a sizeable investment in other brands of augers but want to enjoy the advantages of Little Beaver one-man earth drills?
These ingenious adaptors make your current auger brand compatible with Little Beaver earth drills.
|
 |
1. General brand augers (1" round bar connection)
2. Ground Hog brand augers (7/8" square bar connection)
3. General brand augers (1-3/8" hex bar connection)
|
|
Little Beaver Augers / Other Brand Earth Drills
|
 |
If you own another brand of earth drill, but are looking for the industry’s largest selection of augers, these handy adaptors are for you. These adaptors make any Little Beaver auger compatible with your current brand of earth drill.
|
|
4. Ground Hog brand earth drills (7/8" square drive)
5. General brand earth drills* (1-3/8" hex drive)
* Must turn in clockwise direction
|
|
|
|
 |
 |
When deeper holes are required, the tripod kit provides controlled drilling and easy auger removal. Using a 4" auger and extensions, holes up to 35' can be easily drilled. Designed for soil sampling and geophysical work, the Tripod Kit features fast set-up, a hand winch, and works with the 11 horsepower Hydraulic Earth Drill and one or two-man handles. |
|
 |
 |
 |
 |
 |
| | | | | | |
 |
|
